5/3/2023 0 Comments Mini ramp near meThese can grow in size and eventually make the mini ramp unusable, in addition to making repairs more and more expensive. Gaps and cracks in plywood should be filled not only to stop sound from escaping but also for the safety and longevity of your ramp. This is especially relevant on the metal components like the coping, as metal rings out and can echo loudly. In fact, the sound can reverberate and get louder inside the ramp before escaping. Mini ramps themselves absorb a lot of sound, but a large portion of that absorption can be lost to any openings. This includes any gaps between plywood, cracks that have appeared over time, ends of the metal coping, and possibly even the back of the ramp itself. Covering OpeningsĪnother key step that can often be overlooked is covering any openings in the ramp. Not only will this help reduce any rattling or movement of the ramp, it also ensures a much safer ramp experience.Ī thickness of at least ¾ plywood is a necessity, although going up to 1 inch is certainly not a bad idea. The sides of the ramp are an area where thick plywood is absolutely essential. This can happen when there are not enough supports underneath the plywood, or when the plywood used to craft the sides of the ramp is too thin. Making Great Ramp SidesĪnother less common but certainly annoying area where a ramp can make noise is if the whole ramp is shaking. To help with this, use thicker plywood here and add a few more supports underneath.īecause skaters will rarely actually skate the top of the ramp (ignoring the metal coping, which will be covered later), this area needs less give than other parts of the ramp. The main source of sound coming from the top of the ramp is when users of the mini ramp will drop in or grab the ledge, placing almost their full body weight onto one area. During construction, utilizing thick plywood or stacking other materials here can help dampen the sound. The top of the mini ramp, where skaters drop in from, also sees a lot of movement and can make a significant amount of noise. This is important even if the final layer of your mini ramp will not be plywood. If you are using different thicknesses of plywood for ramp construction, you need to make sure they are level for the end construction. So, the smartest play here is to utilize thick plywood for the surfacing of the ramp here. Thickening only the supports can come with issues, as the surface of the mini ramp needs to be able to give and move. The thicker these supports underneath, commonly made from 2x4s, the less give the ramp will have. When building your mini ramp, there should be support directly at the transition to stop the plywood from flexing so much under the weight of the rider. This is where the ramp meets the flat of the mini ramp. The transitions of the mini ramp are the most common area where a lot of noise will be made. While thick plywood across the board will help significantly in dampening sound, there are some key areas to focus on if you want to maximize your budget. If the budget for building your mini ramp is a main concern, do not worry. Depending on the size of your mini ramp, grabbing thick plywood for the entire ramp may be infeasible due to the increase in cost. There are also sizes in between commonly available at hardware stores. The average thickness of plywood ½ inch, but up to 1 inch is commonly available. If your mini ramp was bought from an outlet and constructed from a different material, this method may be hard for you to enact. Most ramps are made out of plywood, so this is the most important material to get thicker. Using thicker construction materials will allow for the ramp itself to absorb some of the sounds. One of the easiest ways to soundproof your ramp also comes earliest in the process. While you are unlikely to lose your hearing from the sounds of skating on a mini ramp, a deafening of hearing ability can surely happen. In addition, protecting your ears from repetitive, loud sounds is always a good idea for future ear health. This means that often, they will not complain about you skating and you can do so freely. The quieter you can skate your mini ramp, the less of obstruction you will be to others. These are reasons to soundproof your ramp beyond the classic, good-natured case of wanting to make your skating a pleasant experience for others. It can be difficult to hear what’s around you while skating on a mini ramp.The sound bothers you after a period of time.Before getting into the myriad of ways there are to help soundproof your ramp, it is a good idea to list the reasons why you might need to in the first place.Įven if you do not have neighbors or other people complaining about the noise, there are still reasons to soundproof your setup.
0 Comments
Leave a Reply. |